Hall D · Booth D505
Shenzhen Damiao Technology Co., Ltd. was founded in 2019 by a former DJI engineer. The company is determined to provide integrated solutions for joint motors and hub motors, provid…
COMPANY PROFILE
Shenzhen Damiao Technology Co., Ltd. was founded in 2019 by a former DJI engineer. The company is determined to provide integrated solutions for joint motors and hub motors, providing customers with high-performance, cost-effective drives and motors, as well as convenient and easy-to-use debugging software. Damiao Technology has mature and stable motor drive solutions. After 6 years of technology accumulation and application verification, it has launched DM40, DM60, DM80, DM100 and other drives. Since the joint motor was launched in 2022, it has more than 10 brushless DC motors such as DM-J4310-2EC, which are widely used in fields such as mechanical dogs, robotic arms, bionic robots, and technology competitions, and have been recognized and trusted by customers. Among them, the DM-J8009-2EC model motor is used as an educational material and is jointly cooperated with DJI Robmaster.
MAIN PRODUCTS
DM-H65 is equipped with a 17-bit encoder with positioning accuracy of ±0.05°; rated torque 6.0Nm, peak value 21.5Nm, 24~48V wide voltage operation, no-load maximum 480rpm, and supports multiple control modes. Multiple protection mechanisms ensure long-term stable operation and are suitable for scenarios such as humanoid robots, exoskeletons, and intelligent robotic arms.
DM-H55 supports 24-48V wide voltage power supply, the maximum no-load speed can reach 1185rpm, and the operating range is wide; the rated torque is 3.5Nm, the peak value is 9.0Nm, and the load performance is stable. Equipped with a 17-bit encoder, the positioning accuracy is ±0.03°, and multiple over-temperature, over-voltage, and communication loss protections effectively extend the service life. Compatible with various control modes such as MIT and bit-speed mixing control, it is equipped with CAN high-speed communication and UART parameter adjustment interface.
DM-D5730-1EC supports a wide voltage of 24-48V, the maximum no-load speed can reach 1500rpm, and the response speed is excellent; the rated torque is 0.65Nm, the peak value is 1.9Nm, and the load performance is stable. Equipped with a 17-bit encoder, the positioning accuracy is ±0.05°, and it is equipped with multiple protections such as over-temperature, over-voltage, and communication loss, effectively extending the service life of the entire machine. Compatible with various control modes such as MIT and bit rate mixing control, it builds CAN high-speed communication and UART parameter adjustment interfaces.
DM-J10422P-2EC uses 48V power supply, built-in 1:22 reduction structure, rated torque of 100Nm, peak torque of 400Nm, strong heavy-load performance; no-load maximum speed of 120rpm, suitable for low-speed and high-torque working conditions. Equipped with dual 17-bit encoders, the positioning accuracy reaches ±0.03°, and multiple fault protection mechanisms extend the service life. It supports multiple control modes, is equipped with CAN high-speed communication and UART parameter adjustment interface, and is suitable for heavy-duty robot joints, heavy-duty pan/tilts, and large-scale automated actuators.
DM-JH11-2EC supports a wide voltage of 24-48V and provides two reduction specifications of 51 and 101. It has outstanding low-speed and high-torque characteristics, with a rated torque of up to 3.2Nm and a peak value of 7.8Nm. Equipped with dual 17-bit encoders for accurate positioning; equipped with multiple electrical protections to effectively extend service life. It has rich control modes, supports periodic synchronous control, and is equipped with CAN high-speed communication and UART parameter adjustment interface. It is suitable for scenarios such as humanoid robot joints and small precision pan/tilts.
DM-JH14-2EC supports a wide voltage of 24-48V and provides two reduction specifications of 51 and 101. It has outstanding low-speed and high-torque characteristics, with a rated torque of up to 7.8Nm and a peak value of 28Nm. Equipped with dual 17-bit encoders for accurate positioning; equipped with multiple electrical protections to effectively extend service life. It has rich control modes, supports periodic synchronous control, and is equipped with CAN high-speed communication and UART parameter adjustment interface. It is suitable for scenarios such as humanoid robot joints and small precision pan/tilts.
DM-JH17 supports 24-48V wide voltage, provides two reduction ratios of 51 and 101, has outstanding low-speed and heavy-load capabilities, with a maximum rated torque of 24Nm and a peak torque of 54Nm. Equipped with dual 17-bit encoders, the positioning accuracy is ±0.03°; equipped with multiple protection mechanisms to effectively extend the service life. It supports cycle synchronization, MIT and other control modes, has CAN high-speed communication and UART parameter adjustment interface, and is suitable for humanoid robot joints and medium-sized automation actuators.
5730-1EE supports 24-48V wide voltage, the maximum no-load speed can reach 1500rpm, and the dynamic response is fast; the rated torque is 0.65Nm, the peak value is 1.9Nm, and the load operation is stable. Equipped with a 17-bit encoder, the positioning accuracy is ±0.05°, and multiple electrical protections effectively extend the service life. It is compatible with multiple control modes and equipped with CAN and EtherCAT dual communication interfaces for stronger real-time performance.
It adopts 48V power supply and has a built-in 1:20 reduction structure. The rated torque is 50Nm and the peak value can reach 176Nm. It has strong heavy-load performance; the maximum no-load speed is 124rpm, which is suitable for low-speed and high-torque conditions. Equipped with dual 17-bit encoders. Multiple fault protection mechanisms extend service life. It supports multiple control modes, is equipped with CAN high-speed communication and UART parameter adjustment interface, and is suitable for heavy-duty robot joints, heavy-duty pan/tilts, and large-scale automated actuators.
DM-J4310-2EC V1.1 has a rated torque of 3Nm and a peak torque of 7Nm. The motor contains two power interfaces. Either interface can be connected and used alone, or multiple machines can be used in series to facilitate wiring. It can be used in application scenarios such as robotic arms, humanoid arms, and humanoid heads.
DM-J4340-2EC has a rated torque of 9Nm and a peak torque of 27Nm. The motor contains two power interfaces. Either interface can be connected and used alone, or multiple machines can be used in series to facilitate wiring. Suitable for application scenarios such as robotic arms, humanoid arms, humanoid heads, small humanoid legs, etc.
DM-J4340P-2EC rated rectangular 9Nm, peak rectangular 27Nm, with two power interfaces, either of which can be used separately or in multiple series, to facilitate line movement. The output axle bearings are cross-rolled bearings that can be applied to applications such as mechanical arm, human arm, head, small human leg etc.
DM-J6006-2EC rated rectangular 4Nm, peak rectangular 11Nm, applicable to applications such as mechanical arm, human form, rotational foot, and four feet.
DM-J6248P-2EC rated rectangular 30Nm, peak rectangular 97Nm, applicable to applications such as mechanical arm, human form, round foot, four feet, etc.
DM-J8006-2EC V1.1 rating rectangular 8Nm, peak rectangular 20Nm, applicable to applications such as mechanical arm, human form, rotational foot, four feet etc.
DM-J8009-2EC rated rectangular 20Nm, peak rectangular 40Nm, applicable to applications such as mechanical arm, human form, rotational foot, four feet, etc.
DM-J8009P-2EC rated rectangular 20Nm, peak rectangular 40Nm, applicable to applications such as mechanical arm, human form, rotational foot, four feet, etc.
DM-J10010-2EC rated rectangular 40Nm, peak rectangular 150Nm, applicable to applications such as mechanical arm, human form, rotational foot, quadrilateral etc.
DM-J10010L-2EC rated rectangular 40Nm, peak rectangular 120Nm, applicable to applications such as mechanical arm, human form, rotational foot, four feet etc.
DM-S3519-1EC rated rectangular 3.5Nm, peak rectangular 7.8Nm, driver external.
DM-G6220-rated rectangular 1.3Nm, peak rectangular 2.45Nm, electrons in the middle, easy to cross lines, suitable for applications such as clouds.
DM-H6215-modified rectangular 1Nm, peak rectangular 2Nm, applicable to application scenarios such as wheeled feet, four feet, etc.
DM-H3510 rating rectangular 0.18Nm, peak rectangular 0.45Nm, applicable to desktop-scale applications such as rotational/quax, clamp, etc.
DM-J3507-2EC rated rectangular 0.8Nm, peak rectangular 3Nm, suitable for desktop-scale rectangular/tangular, clamp and so on.